Filling a glass from a freestanding reverse osmosis system on a kitchen worktop

Reverse osmosis
for your home

Want to filter tap water for a glass of water or a pot of tea? Place the Countertop on your worktop and fill its reservoir from the tap. If you prefer a dedicated drinking water tap, PureAqua can install a system under your sink.

Which setup suits your kitchen?

Both systems use reverse osmosis to filter tap water. The main differences are where you put them, how they fill and how you dispense the water.

On the worktop

Space needed
A space 22 cm wide and 35 cm deep, near a power socket.
Daily use
Fill the reservoir yourself. Pour a glass or lift out the one-litre jug to take to the table.
A good fit if
you rent, want to keep your current tap or plan to take the unit with you when you move.
How the Countertop works

Under the sink

Space needed
The system goes in the kitchen cupboard with a drinking water tap on the worktop.
Daily use
Turn on the tap to fill a glass or carafe. The system draws water from the mains.
A good fit if
you fill glasses or jugs often, prefer to skip refills and want to keep the worktop clear.
Installation by PureAqua
The round display controls the quantity and temperature of water dispensed

How to make reverse osmosis water on your worktop

  1. Fill the reservoir. The rear reservoir holds 3.25 litres of cold tap water. Before using the unit for the first time, flush it as described in the manual.
  2. Let the unit filter the water. Water passes through a reverse osmosis membrane and then over mineral rock. A separate jug collects the filtered water.
  3. Choose your temperature. Dispense water at room temperature for a glass of water, or choose a hot setting up to 95 °C for tea.
View the Countertop and its price

Would you prefer a dedicated tap?

Want to keep your existing mixer tap or Quooker? With The Source 50 under the sink, a separate drinking water tap can be fitted alongside your existing tap.

Tell PureAqua which tap you have and how much cupboard space is available. We can advise on the setup and provide a quote including installation.

An under-sink reverse osmosis filter in an open kitchen cupboard

Questions about reverse osmosis at home

Learn more about reverse osmosis
Do I need a mains water or drain connection?

The Countertop only needs a power socket. You fill the reservoir yourself. When the refill light appears, empty any remaining water first. An under-sink system connects to the mains water supply and drain.

How much worktop space do I need?

The Countertop is 22 cm wide, 35 cm deep and 30 cm high. Leave space above it to lift out the reservoir and replace the cartridge. Check the clearance beneath any wall cupboards.

How much does a home reverse osmosis system cost?

The Countertop costs €495,00 including the first filter. A freestanding unit has no installation charge. Allow for replacement filters. The cost of an under-sink system depends on the tap, the filter and the installation. See the current Countertop price and filter options.

How often do I need to replace the filter?

The Countertop filter lasts up to 1,200 litres or twelve months, whichever comes first. At four litres a day, you would reach 1,200 litres in about 300 days. Follow the unit’s filter indicator. For an under-sink system, follow the maintenance advice for your model.

Does it filter water for my shower or washing machine?

The Countertop filters the water in its reservoir. An under-sink system supplies its own drinking water tap. Your shower and washing machine continue to use water from your normal household supply.