Installation by a specialist

Installing a water softener: connecting, in the meter cupboard, and DIY

Installing a water softener can be done in two ways: you can have it installed by our specialist (a one-off fee of €299 for the Joep, €399 for the AquaCell) or you can connect it yourself using the clear step-by-step guide. The device is placed at your main water point — usually in the meter cupboard — so that you have soft water throughout your entire home.

  • Installation by a specialist: €299 for the Joep, €399 for the AquaCell
  • Or install it yourself: free, with a step-by-step guide
  • Compact Joep (48 x 27 x 48.5 cm) fits into almost any meter cupboard
  • WRAS-approved — independently tested for safety

In short

You can install a water softener yourself or have it installed. The unit is connected to the main water pipe, usually in the meter cupboard, with a connection to the sewer for the flush water and (in the case of the Joep) a power outlet nearby. A water softener can be placed in the meter cupboard, provided it is installed correctly.

  • Have it installed by our specialist: €299 for the Joep, €399 for the AquaCell
  • Install it yourself: free with the manual, for those who are handy
  • Location: meter cupboard near the main water supply; a garage, utility room or cellar is also possible
  • Required: connection to the water supply and sewer, and a power outlet near the Joep

On this page

Quickly go to the topic you are looking for.

How do you install a water softener?

You install a water softener at the point where the mains water enters your home, so that all the water in the house is softened. Broadly speaking, it works like this: the device is connected to the main water pipe via a bypass (in and out), the drain for the flush water is connected to the sewer, and an overflow connection is added. With an electric device like the Joep, you also connect it to a power outlet. Afterward, you top up the salt and set the device to your water hardness.

Our specialist does this professionally. If you would like to install the water softener yourself, follow the included installation manual step by step.

The device is installed at your main water connection — giving you soft water from every tap, from the shower to the washing machine.

€299Joep installation by a specialist

Connecting a water softener in 4 steps

This is how the connection to the water supply and sewer works, whether you install it yourself or have it installed:

1

Step 1: Connect to the main water supply

The device is connected via a bypass on the main water line (in and out), allowing you to divert the water during maintenance. For the Joep, that is 3/4" BSP.

2

Step 2: Sewerage discharge

The regeneration rinse water goes to the sewer via the drain connection, with an additional overflow connection (1/2").

3

Step 3: Connect power

An electrical appliance like the Joep needs a nearby power outlet (240V). The AquaCell works entirely without electricity.

4

Step 4: Refill and adjust salt

Finally, top up the salt and set the appliance to your water hardness. It will then regenerate itself.

Water softener in the meter cupboard: is that allowed?

Yes, a water softener can be placed in the meter cupboard, and that is also the most common location — after all, that is where your main water line enters. A water softener in the meter cupboard is not prohibited and is not dangerous, as long as it is installed correctly and the device is certified (the Joep is WRAS-certified). However, you do need a few things: enough space, a drain for the flush water, and, in the case of an electric device, a power outlet nearby.

Will a water softener fit in a small meter cupboard?

Often, yes. At 48 x 27 x 48.5 cm (H x W x D), the Joep is compactly designed and fits in almost any meter cupboard. Are you unsure? Send us a photo of your meter cupboard, and we will check personally if it fits.

Water softener in the garage or basement?

If you have little space in the meter cupboard, you can also place a water softener in the garage, utility room, or basement — as long as the device is kept frost-free, is connected to the main water line, and has a drain and (in the case of the Joep) a power source nearby.

Not sure if it will fit? Send us a photo of your meter cupboard and we will personally take a look with you.

48x27x48.5cm — fits in almost any meter cupboard

Which water softener is the easiest to install?

The Joep is designed for easy installation: compact, with a high flow rate and a size that fits in almost any utility cupboard. If you want a device that operates without electricity, the AquaCell is the premium option.

Premium

PureAqua AquaCell water softener

Works completely without electricity, so you don't need a power outlet in the meter cupboard. From €2,348.

  • No power outlet required
  • 24/7 soft, limescale-free water
  • Reliable and low-maintenance
View the AquaCell

How much does it cost to install a water softener?

Installation by our specialist costs a one-time fee of €299 for the Joep and €399 for the AquaCell; self-installation is free. This way, you know exactly what to expect regarding installation costs. Would you like to see the full cost overview, including purchase, salt, and maintenance? Then check out the water softener price.

Prefer everything in one monthly fee? Take a look at the pure water subscription, including installation and maintenance.

Frequently asked questions about installing a water softener

more questions

Is it permitted to install a water softener in the meter cupboard?

Yes. The meter cupboard is the usual location because your main water pipe enters there. It is not prohibited, provided the water softener is installed correctly and safely.

Is a water softener in the meter cupboard dangerous?

No. With a certified device (the Joep is WRAS-certified) and a correct installation, there is no danger. You will, however, need a drain and, in the case of an electric device, a power outlet.

Can I install a water softener myself?

Yes, if you are handy, using the included step-by-step manual. Would you rather be sure of a correct installation? Have the water softener installed by our specialist for €299 (Joep) or €399 (AquaCell).

How do I connect the drain of a water softener?

The regeneration rinse water goes via the drain connection to the sewer, with an additional overflow connection. Our specialist will connect this according to the regulations.

Does a water softener fit in a small meter cupboard?

Usually yes: the Joep is compact at 48 x 27 x 48.5 cm. Send us a photo of your meter cupboard for a personal check.

How long does it take to install a water softener?

An experienced mechanic can usually finish it within one to a few hours, depending on your situation.

Everything about installing a water softener

Where is the best place to install a water softener?

The best place is directly after your water meter, where the tap water enters your home — usually the utility cupboard. This way, all the water in the house is softened. If there is not enough space there, you can also place the water softener in the garage, utility room, or basement, provided it is frost-free and has a drain and (for the Joep) a power outlet nearby.

Is a water softener allowed in the utility cupboard, or is it prohibited?

A water softener in the utility cupboard is permitted and common; there is no ban. It is important that the device is certified and correctly connected to the water supply and the sewer. The Joep is WRAS-certified and independently tested for safety.

How do you connect a water softener to the water supply and sewer?

The device is connected via a bypass to the main water pipe (in and out), so that you can divert the water during maintenance. You connect the drain for the flush water to the sewer, and an overflow connection is added. A neat connection, carried out according to the rules, prevents leaks and water damage.

Can you install a water softener yourself?

Yes. If you are handy, you will manage just fine with the step-by-step installation manual. If you have doubts about the water connection or the drain, opt for installation by our specialist — that way you know for sure that everything is correct.

Water softener in the utility cupboard: how much space do you need?

Count on a free space of approximately 50 by 30 cm next to your main water point, plus some workspace to refill the salt. At 48 x 27 x 48.5 cm, the Joep is designed to fit in almost any standard utility cupboard.

What connections does a water softener need?

A water softener has an inlet and outlet on the water pipe (3/4" BSP for the Joep), a drain to the sewer, and an overflow connection (1/2"). An electric device like the Joep also requires a power outlet (240V).

How long does the installation take and do you have to worry about it afterwards?

The installation itself is usually finished within a few hours. After that, the device regenerates itself and you only have to refill the salt periodically. Want to know more about how it works? Read how a water softener works or check your water hardness first.

Would you like to install a water softener? Have it professionally installed by our specialist or do it yourself with the manual. Are you unsure whether it will fit in your utility cupboard? Send a photo, and we will take a look with you. Ready to choose? View the water softeners.

Taeke Pieter de Jong
Written by Taeke Pieter de Jong, Service technicianReviewed by Simon Dijkstra, Waterontharder-expertLast updated on
Resources(3)